Deep - Cleansing

                                    for tiles, grouts and

                                                      other challenging surfaces

 

                                                 warming   

                                                                 applying

                                                                             stripping off

 

                                                                                                  simply clean

 

 

Who doesn't know the problem?

Despite regular cleaning, grouts are dark, unsightly between tiles and seem untidy!

Conventional cleaning agents and methods achieve at best unsatisfactory results. 

 

The solution to this problem is called 

 

WASONEX®

 

 

WASONEX® is a cleaning substance on the basis of renewable primary products. 

Environmentally friendly and completely biodegradable WASONEX® is simply applied and highly effective.

WASONEX® is not intended for substituting conventional cleaning agents. On the basis of its special properties it is intended for being used as an addition to regular cleaning. An additional mechanical treatment isn't required.

At first WASONEX® liquifies by means of heating process and is subsequently ready for application. Due to the low processing temperature and the composition of WASONEX® the application is absolutely uncomplicated. 

Based on the flowing capable condition, WASONEX® doesn't merely cover the surface to be cleaned instead it penetrates gaps, even capillary cracks and impurities. 

During the drying process WASONEX® forms a flexible film and sticks to impurities.

This film acts like a foil and is subsequently removed with the soil as a unit. A grout is left behind with a new look.

Deep-cleansing with WASONEX® means extraordinary results without effort or using water or scrubbing agents.

  

How to use WASONEX®?

Step 1: Warming

Bevor applying you would warm WASONEX® up to the processing temperature. Unscrew the bottle cap and place the bottle in a tup of warm water. Automatic steam heaters are particularly comfortable and energy-saving.

Never heat up WASONEX® in the microwave!

 

Step 2: Applying

Cut the grommet down so that the resulting opening corresponds to the gab-width. Screw the grommet on the bottle. Keep the bottle pointed diagonally over the gab to be cleaned. A slight pressure on the bottle is sufficient to ensure a controlled WASONEX® flow-out.
The gap should be uniformly covered but not be piled on with WASONEX®.

 

 

Step 3: Stripping off

Immediately after applying WASONEX® cools and forms a coating. WASONEX® penetrades into the filth and binds it to itself. The cleaning process starts.
Simultaneously the surface loses its stickiness and is even walkable now.
Pull off the flexible cleaning substance together with the soil adhering like a foil.
A deeply cleaned joint remains behind.
Since it is completely biodegradable the used cleaning film can simply be discarded in the compost or in the domestic garbage.

 

Please note that you have to use special cleaning agents first, in case of:

mould fungus and its discolouring

grouts contaminated with grease   (kitchen floor or floors in dining rooms)

limescale deposits on bathroom tiles and grouts

when you use soap as a cleaning agent, because this forms lime soap on the surface which WASONEX can not penetrate

Please don't be afraid to contact us for further information an we will try to advice you on any question.